Moonlight

1. First, you need to choose your base colour. The base colour is the which slightly shows through, once the effects are applied. The example below is on a medium blue base.

Moonlight comes as a Silver or Gold finish. This is the top (final) layer to create your desired finish

The area to be painted should be smooth, clean, dry and uniform. Fresh plaster can be painted after a four-week seasoning. Remove peeling or flaking paint.

Older painted area’s should be cleaned before application, with water (and detergent if needed). Fill cavities with filler.

It is recommended to prime or paint any high absorbing materials (like fresh plasterboard).

Open the container and stir the contents thoroughly.

Apply Moonlight with a flat paddle brush.

Depending on the desired effect, painting can be done vertically, horizontally, randomly, a slantwise pattern or a chevron pattern. The manner in which the paint is apply will determine the decorative effect.

Stage your paint work, by paint small area’s at a time (like 1m squared)

During and after your painting job, ventilate the room until the odour is gone.

The coverage area:  Approx 10-15m² (depending on desired final effect)

The coverage area:  Approx 10-15m² (depending on desired final effect)

Tools required:  Primacol Decorative Applicator Brush (Flat Mottler Brush)

Dry to Touch:  4-8 hours

Total Dry time:  24 hours

Capacity:  1L

Due to limitations of printing technology, the presented colour should be considered as approximate only. Any deviation shall not be the reason for any customer complaint. Request a pattern book with accurate colours from your us or drop by to our showroom in Dublin. Always make a spot test before painting to become familiar with the paint application method. For larger areas, use products from the same batch.

Important! Plan your work properly to use up the prepared paint as soon as possible but within 24 hours. Otherwise, it is very likely that the glittery effect will be less visible.

Painting must be performed at a room and substrate temperature > 5 °C

Painting must be performed at a room and substrate temperature > 5 °C. Avoid direct sunlight on the surface being painted.