Polaris

The area to be painted should be smooth, clean, dry and uniform. Fresh plaster can be painted after a four-week seasoning. Remove peeling or flaking paint.

Older painted area’s should be cleaned before application, with water (and detergent if needed). Fill cavities with filler.

It is recommended to prime or paint any high absorbing materials (like fresh plasterboard).

Open the container and stir the contents thoroughly.

Do NOT use an electric mixer. 

Apply a layer of Royal Silk on a dry surface using a Venetian trowel. Perform this step within small areas and in various directions to cover the entire surface. Thickness of the applied layer should not exceed 1 mm.

When the decoration is drying, smooth the surface using a trowel and moving it in various directions. In this way, metallic reflections will be obtained.

If necessary, once dried (about 4 hours), apply another layer and proceed in the same way as for the first layer.

The coverage area:  Approx 12-14m² (depending on desired final effect)

Tools required:  Primacol Application Brush (Mottler Brush) 

Dry to Touch:  1-2 hours

Total Dry time:  12 hours

Capacity:  1L

Due to limitations of printing technology, the presented colour should be considered as approximate only. Any deviation shall not be the reason for any customer complaint. Request a pattern book with accurate colours from your us or drop by to our showroom in Dublin. Always make a spot test before painting to become familiar with the paint application method. For larger areas, use products from the same batch.

Important! Plan your work properly to use up the prepared paint as soon as possible but within 24 hours. Otherwise, it is very likely that the glittery effect will be less visible.

Painting must be performed at a room and substrate temperature > 5 °C

Painting must be performed at a room and substrate temperature > 5 °C. Avoid direct sunlight on the surface being painted.