A high-quality plaster for indoor use with a structure imitating a surface of rust.
In combination with the use of Decorust activator, it gives a realistic rust effect. It is perfect for industrial rooms, and will interestingly diversify the living area in a minimalist, modern and soft loft style.
DecoRust has a coverage of 7 Meters Squared
To perform the effect you also need: Contact Agent, Decorust Activator, Decorative Lacquer.
The area to be painted should be smooth, clean, dry and uniform. Fresh plaster can be painted after a four-week seasoning. Remove peeling or flaking paint.
Older painted area’s should be cleaned before application, with water (and detergent if needed). Fill cavities with filler.
It is recommended to prime or paint any high absorbing materials (like fresh plasterboard).
How to Apply
How to Apply
Open the container and stir the contents thoroughly.
Do NOT use an electric mixer.
Apply a layer of Royal Silk on a dry surface using a Venetian trowel. Perform this step within small areas and in various directions to cover the entire surface. Thickness of the applied layer should not exceed 1 mm.
When the decoration is drying, smooth the surface using a trowel and moving it in various directions. In this way, metallic reflections will be obtained.
If necessary, once dried (about 4 hours), apply another layer and proceed in the same way as for the first layer.
The Boring Stuff
The Boring Stuff
The coverage area: Approx 12-14m² (depending on desired final effect)
Tools required: Primacol Application Brush (Mottler Brush)
Dry to Touch: 1-2 hours
Total Dry time: 12 hours
Due to limitations of printing technology, the presented colour should be considered as approximate only. Any deviation shall not be the reason for any customer complaint. Request a pattern book with accurate colours from your us or drop by to our showroom in Dublin. Always make a spot test before painting to become familiar with the paint application method. For larger areas, use products from the same batch.
Important! Plan your work properly to use up the prepared paint as soon as possible but within 24 hours. Otherwise, it is very likely that the glittery effect will be less visible.
Painting must be performed at a room and substrate temperature > 5 °C
Painting must be performed at a room and substrate temperature > 5 °C. Avoid direct sunlight on the surface being painted.
Make sure you have a similar base coloured base coat (pink base for a pink silk wall or a blue base for a blue silk wall).
Open the paint and stir contents, for about 5 minutes
Add Colourant to obtain final colour
Stir contents again, for about 5 minutes
Apply a layer of Royal Silk on a dry surface using a Venetian trowel.
Perform this step within small areas and in various directions to cover the entire surface, no more than 1mm thick.
When the decoration is drying, smooth the surface using a trowel and moving it in various directions.
In this way, metallic reflections will be obtained.
A very soft feel to any room, adding a little something different.